Heavy turntable

Granite base, brass platter with a total weight of 100 kgs, which suppresses micro vibrations. Since the platter and tonearm are floated on air layer absorbs even the slightest vibration; the 28 kgs platter is supported only by the pressure of the air (only a few hundred grams). Normally, with a single point of support, you'll hear a resonant sound when tapping the platter, but by damping it with a layer or air, all resonances are heavily damped.

Non-servo motor drive

Servo noise is eliminated by open control. The platter is driven by a DC Brush-less motor and thread, and the platter rotates by inertia alone.

It uses a unique "XFD system" that provides to the motor a highly accurate voltage with no fluctuations, based on a crystal transmitter.

Air float linear tracking tonearm

Like the platter, the air layer absorbs micro vibrations of the tonearm, and the 0.1 g of air force moves smoothly and accurately traces the sound grooves. The linear tracking system, which has the same trajectory as record cutting, is also used. It eliminates tracking errors between the outer and inner circumference for fine and stable pickup.

Silent air supply

The air supply is equipped with a highly reliable pump that is also used for medical equipment, and powerfully supplies the capacity required for the platter. The double-sealed sound leakage and vibration prevention system maintains sufficient silence even when installed in a listening room.